本公司黑色导电布是通过在镍铜导电布的基础上，外加一道电镀镍锡合金黑化处理,区别于国内同行普通涂黑处理而得到的黑颜色导电布，不同于一般的碳黑处理，表层成分是经过电镀的镍锡合金，实际是就是所谓的镀锡导电布，颜色偏黑。因此黑颜色不会因为磨损或高温等而发生明显变化，黑色导电布有黑色格子导电布，黑色平纹导电布，黑色网纱导电布等，根据客户要求可以选择单面黑色，双面黑色。
一般导电布颜色为灰色，使用后易留指纹，斑点。本公司使用镍锡合金电镀黑化处理有效的解决了问题，对于导电网纱布，比同类产品具更好的透光性，导电性，屏蔽效果更好。
对一般织物，如格子布作黑化处理比较困难，本公司采用采用单面镀黑色处理，成本大为降低，同时性能更稳定，即使经过高温下也不容易脱颜色，不留指纹印，不留水渍，同时能有效解决切边毛丝问题。
Blacking coating, just add Ni-Sn alloy blacking coating treatment, it’s different from common carbon coating, could use as Sn-plated fabric.We have blacking coating for woven, Rip-Stop, mesh etc.
Existed normal mesh fabric need to be concentrated to handle on the gray color, but black nickel plating in the form of tin & nickel alloy plating is good for finger print, stain, dusty. Above all , less reflex against light, improved permeability and better quality with good shielding effectiveness.
For Rip-Stop, taffeta woven fabric, in the situation of hard produce black plating. Black coating has developed as a method to be coated on the one side of fabric instead of double side coating. It is the same surface resistance as a normal and lower cost product. The coating surface does not peel out with another additional process, keeping in the same color and good for avoiding finger print., waterproof and less Burr.
Spec.(range) 尺寸规格mm | Descriptions/描述 | Plate镀层 |
0.035±0.01 | 黑色超薄镍锡方格布 | Ni+Cu+Ni+Sn |
0.035±0.01 | 黑色超薄镍锡平纹布 | Ni+Cu+Ni+Sn |
0.044±0.01 | 黑色超薄镍锡方格布 | Ni+Cu+Ni+Sn |
0.07±0.005 | 黑色超薄镍锡方格布 | Ni+Cu+Ni+Sn |
0.085±0.005 | 黑色平织布 | Ni+Cu+Ni+Sn |
0.09±0.005 | 130目铜锡黑色网纱布 | Ni+Cu+Ni+Sn |
0.09±0.005 | 200目铜锡黑色网纱布 | Ni+Cu+Ni+Sn |
0.105±0.005 | 80目铜锡黑色网纱布 | Ni+Cu+Ni+Sn |
0.105±0.005 | 方格黑色导电布/单面黑和双面黑 | Ni+Cu+Ni+Sn |
0.105±0.005 | 平织黑色导电布/单面黑和双面黑 | Ni+Cu+Ni+Sn |
平纹，方格导电布可以根据客户要求作成单面黑色或者双面黑色。