德国AB 5401 DiPsPH 100-Er 2,5bar
过滤器用 纵向双膜盒差压表
Differential Pressure Gauges
with vertical diaphragm /
measuring membrane
Class 2.5 NCS 100 ModelDiPsPH
Application
Differential pressure gauges model DiPsPH are suitable for overpressure, underpressure- and differential pressure measurement in the field of industrial measurement technique.
Typical special applications are differential pressure measurements between flow and return flow in heating systems, monitoring of filters, aerators and compressors.
Measuring units and measuring chambers are available as different materials. An adaption of the instruments to different requirements is possible with this.
Construction and Measuring Principle
A robust, non-sensitive membrane, resp. for 10 bar and above a diaphragm measuring system is provided as measuring cell.
In rest position the strengths, that effect the measuring membrane/ diaphragm (5) are equalised both-sided. An one-sided strength, which switches the measuring membrane/diaphragm in one direction up to the compensation of the elastic force, arises by the measured pressure or differential pressure.
If overload occurs, the measuring membrane/diaphragm reinforces against metallic installation surfaces. A centrically ordered ram transfers the motion of the measuring membrane/diaphragm on to the movement.
Nominal case size 100 (4")
Accuracy class 2.5 according to EN 837-3
Pressure range 0-400 mbar to 0-25 bar (0-6 psi to 0-300 psi)
according to EN 837-3
Max. static
operating pressure: – pressure range < 400 mbar: 6 bar
– pressure range 0.6 bar: 10 bar
– pressure range 1 bar: 16 bar
– pressure range 1.6 bar and above: 25 bar
Overrange protection one-sided, both-sided- and reciprocal
overrange protected up to 25 bar
and underpressure protected
Temperature resitance ambient temp.: -10...+70 °C (14 °F -158 °F)
medium temp.: +70 °C max. (158 °F)
Temperature influence The additional error caused by temperatures
differing 10 °C of the reference
temperature +20 °C according to
EN 837-3 can be up to 0.8%.
Protection type IP 54 (EN 60529 / IEC 529)
Standard Version
Wetted parts:
Pressurised chambers aluminum, painted black
with connections 2 x female thread G ¼
Sealings NBR
Diaphragm < 10 bar measuring membrane NBR
> 16 bar diahragm Duratherm
Inner section 1.4310 (301 stainless steel)
and 1.4305 (303 stainless steel)
Cover plate polycarbonate (Makrolon)
Movement brass
Zero point adjustment frontsided
Dial aluminum, black figures,
white background
Pointer aluminum black
Mounting 3 brackets for panel mounting
Position of installation any
Functional Diagram
(measuring unit with measuring membrane)
1. Pressurised chamber
2. Movement
3. Ram
4. Resilient elements
5. Measuring membrane
+ = higher pressure
– = lower pressure
Special Versions
• Connections G ¼ B brass or 1.4305 (303 stainless steel);
Cutting ring fitting – made of steel or 1.4571
(316 stainless steel)
for 6, 8, 10 or 12 mm tube;
– made of brass
for 6, 8 or 10 mm tube
• Membrane and sealing (pressure ranges < 10 bar) Viton
• Sealing Viton for diaphragm Duratherm
• Pressurised chamber made of aluminum HART COAT, or made
of 1.4305 (303 stainless steel)
• Other pressure ranges and special scales upon request
• With installed pressure switch, see data sheet 5495
Accessories
• Front flange-assembly Er for panel mounting,
installation ring Ø 132 mm
steel black (standard) or stainless steel (option), with
mounting spacers and fixing screws
• Manifold and pressure gauge valve
made of 1.4571 (316 stainless steel),
3-Spindle (Model 15) or 4-Spindle (Model 16; not suitable for
standard version for panel mounting)
Ordering Information (model construction):
Please specify in your order:
Basic model/nominal case size: DiPsPH 100
Code letters for
type of mounting: –W (panel mounting = standard)
–Er (with installation ring for panel mounting,
see accessories)
Pressure range: according to EN 837, e.g. 0-4 bar
Specifics: see above; especially information on
connections, if not standard
Examples:
• DiPsPH 100-W, 0-6 bar
• DiPsPH 100-Er, 0-2,5 bar, cutting ring fitting made of steel for Ø 8 mm
Case Configurations, Dimensional Data and Weights
Bottom connections parallel one behind the other,
3 mounting brackets for panel mounting,
standard version, code letter –W
Special version
connection
cutting ring fitting
北威州的ARMATURENBAUGmbH 是一家拥有长年生产压力测量仪器传统的中型企业，它的前身是1903年成立的位于德国Halle/Saale的 August Beer 公司。大约180员工为了公司的前途不断地努力工作。
MANOTHERMBeierfeld GmbH的前身是撒克逊州的“Meßgerätewerk Beierfeld”。自1957年以来，这里生产工业用压力和温度测量仪器以及气体压力温度计、保护管、接触压力表、真空计，1991年MANOTHERMBeierfeld GmbH 作为 ARMATURENBAU GmbH 的子公司私有化。
MANOTHERMBeierfeld GmbH 客户主要分布在德国东部、东欧、前苏联国家和中国这些地区和国家之中。
我们的产品范围包括高价值的压力表和温度测量仪器，多年来在全球范围内享有极高的声誉。我们能够很自豪地说，客户高度赞誉我们的压力和温度测量仪器的质量和相应的技能以及可靠性。
欢迎致电咨询订购德国AB 5401 DiPsPH 100-Er 2,5bar 过滤器用 纵向双膜盒差压表
电话: 56291930
传真：
QQ：823377546 36968574
邮箱：sales@zoriver.cn
公司官网：http://www.zoriver.cn http://www.zoriver.com.cn