剪带机、SMT自动剪废编带机、SMT自动剪带机、SMT废料带剪切机、SMT料带切割机、SMT剪带机、料带剪切机、SMT料带切断、自动化剪带机
导入前：
改善前：车间管理困难，人员剪料带，需要专属场地放置料带
改善后，无需人工剪料，车间环境整洁，无需专用场地放置料带，客户满意度更高！
分享产品
产品名称：SMT自动料带切割机
产品型号：CM-680A
用途描述：业界唯一一款兼容软带切割的自动剪料带机，通过微电器控制器对设备进行精密的切割控制，多重保护模式，配合进口材质的刀片，可以满足稳定的切割需要，适用于任何一款贴片机（无需气源）
在线咨询：销售热线： 4008-839-680
加入收藏夹
产品资料
产品状态
产品特点
本机特点：
采用微电脑智能控制切料延时,延时剪带及传感器模式(有板贴装时剪带)二种模式
新型剪带机适用于SMT各种料带，从0.04mm的薄膜到1.5mm的厚料带都可以轻松剪断;
性能稳定：采用进口硬质高速钢齿形刀具，类似于剪刀的原理，剪断各种料带，稳定而耐用，有效剪切宽度680mm。
机器外形尺寸：(L)900X(W)260X(H)430，占地面积小，使用及存放都很方便;(此外形尺寸是根据客户贴片机的飞达头宽度进行定制的);
灵活：重量只有26KG，配置有四个直向脚轮，方便搬运.
防静电型料框+不锈钢支架边框;(优点：外形美观，重量轻，结实，耐用)，料盒加装安全感应装置
状态报警,无料框时不剪带
精密CNC加工的切脚传动系统+双直线导轨
采用全数控钣金工艺+高附着力工艺喷塑处理,经久耐用,高端大气.
精密减速电机传动,无需要压缩空气,减少因气压波动的不稳定切料.
产品描述
还在SMT车间料带多,不便于收集而烦恼? 还在因为料带未剪,造成的人机及配件损伤而担忧,还在生产现场整洁问题,而失去客户的订单? 这些烦恼,或许是因为烦心"料带" 让我们不是那么省心,力拓推出自动智能剪料带机,无需人工管理,为您贴片机清理废料带.
CM-680 SMT智能料带切割机，用于贴片机料带回收处。通常没有自带回收功能的贴片机，废弃料带都是用垃圾桶回收，人员手动用剪刀剪断。而SMT料带剪带机则完全代替人员手动剪料带,将SMT料带规则切割回收.无需专用场地放置废弃料带,同样做高效的有偿回收处理.
产品参数
主要技术参数：
使用温湿度：10±40度 20%-90%RH 相对温度
料带材质： 8M纸带
8-44M塑料带
乙烯软带（可选切割）
切料周期：9秒（不含延时停顿时间）
有效切料宽度:680MM (可根据客户贴片机订制)
外形尺寸: (L)900X(W)260X(H)430
重量:26KG
功率: 0.05KW
主要耗件价格：
上主刀（进口高速钢） 耗损周期：1-2年
下副刀（（进口高速钢） 耗损周期：1-2年
传动皮带 耗损周期：1-2年
Share products
Product Name: SMT automatic cutting machine
Product model: CM-680A
Description: the only one in the industry is compatible with the automatic cutting machine with flexible belt cutting machine, through the micro electrical controller to the equipment for precision cutting control, multi protection mode, with the imported material of the blade, can meet the stability of cutting needs, suitable for any one chip (no gas source)
Online consulting: Sales Hotline: 4008-839-680
Add to Favorites
Product information
Product status
Product features
Local characteristics:
Microcomputer intelligent control cutting delay, delay shear zone and sensor mode (with a plate attached to the shear band) two modes
The new strip cutting machine is suitable for SMT with a variety of materials, from the thick 0.04mm film to the 1.5mm band can be easily cut;
Stability: the imported hard high speed steel tooth cutting tool, similar to the principle of scissors, cut a variety of material belt, stable and durable, effective cutting width 680mm.
Machine dimensions: (L) 900X (W) 260X (H) 430, covers an area of small, use and storage is very convenient; (the dimension is customized to customers of the placement machine feeder head width);
Flexible: the weight is only 26KG, equipped with four straight casters, easy handling.
Anti - static type material box + stainless steel frame frame; (advantage: beautiful appearance, light weight, strong, durable), material box with safety induction device
State alarm, no material box without shear
Precision CNC machining of cutting pin drive system + dual linear guide
The CNC sheet metal process + high adhesion process of spray treatment, durable, high-end atmosphere.
Precision reduction motor drive, without the need to compress the air, reduce the pressure fluctuations due to unstable cutting material.
Product description
Still SMT workshop material with multiple, not easy collection and trouble? Still because of the material belt is not cut, caused by machine and accessories damage and worry, still in production site clean and tidy, and lose customers orders? These troubles, perhaps because worry "strip" let us not so worry, Rio Tinto launched intelligent automatic cutting machine, no need of labor management, for your placement machine clean up waste with.
SMT CM-680 intelligent belt cutting machine, used for the placement machine material back to the collection. Usually no machine with a recovery function, are used with waste material recycling bin, manually cut with scissors. The SMT belt cutting machine is completely replaced by the manual cutting belt, the SMT material with the rule of cutting the recycling.
Product parameters
Main technical parameters:
Temperature and humidity: 10 + 40 degrees 20%-90%RH relative temperature
Strip material: 8M tape
8-44M plastic belt
Ethylene soft band (optional)
Cutting period: 9 seconds (not including delay time)
Effective cutting width: 680MM (can be customized according to the customer placement machine)
Dimensions: (L) 900X (W) 260X (H) 430
Weight: 26KG
Power: 0.05KW
Main consumption price:
On the main (imported high-speed steel) consumption cycle: 1-2
Under the knife (high speed steel (imported) consumption cycle: 1-2