FASTSEAL PIPE REPAIR KIT
(WATER ACTIVATED TAPE) 管道修补带/水发泡带
管道修补带，水发泡带，Pipe Repair Kit, Water Activated Tape
General Description
The Fastseal Pipe Repair Kit is an inexpensive and easy to use kit for repairing leaking pipes of industrial or home. The contents of the kit includes a fiberglass polypoxide soaked resin bandage and a putty. It can be applied to the most commonly used pipes: PVC, fiberglass, steel, copper, concrete and the others. The kit can be used on pipes with internal pressure up to 25 bar.
The installation process takes only a few minutes and the pipe is ready to be used within an hour.
Availability
IMPA Code | Tape Size | Box weight |
812361 | 50 mm x 1.2 m | 160 g |
812364 | 50 mm x 1.5 m | 180 g |
812362 | 50 mm x 3.6 m | 220 g |
812365 | 75 mm x 2.7 m | 250 g |
812366 | 75 mm x 3.6 m | 300 g |
812363 | 100 mm x 3.6 m | 400 g |
Contents
The Fastseal Pipe Repair Kit includes:
- 1. One aluminum bag containing a polyurethane resin soaked bandage
- 2. One package of epoxy putty
- 3. One pair of latex gloves
- 4. One English instruction
Do not open the aluminum bag before the pipe is ready for repair. It is crucial to put on the gloves (included) and safety glass (not included) while applying the product.
YOU WILL NEED: a small container of water, file or sandpaper and safety glass.
Repair Procedure
- 1. Turn off the liquid supply. Dull the surface that is to be repaired using file or sandpaper.
- 2. Put on the latex gloves. Take the epoxy putty out of the sealed plastic bag. Remove the protective film. Mold the epoxy putty until it is smooth and dark grey and until it becomes warm (approx 20 seconds).
- 3. Apply the epoxy putty to the leak so that it fills the holes and cracks.
- 4. Rip the aluminum bag to take out the bandage and dip it in the water for 5 seconds. Squeeze the roll of bandage hard twice and take it out of the water.
- 5. Apply it quickly because the time of application is 2 minutes max.Wrap the bandage tightly and carefully around the surface being repaired. Use the entire roll of bandage.
- 6. Dip the gloves in water and quickly press the resin bubbles back into the bandage wrapped surface, Smooth the wrapped bandage with precise backward and forward movements until the bubbles stop appearing (approx. 3 to 5 minutes).
