FWJ--3型复合软管灌封机主要用于一次传动原理。采用日本松下传感器等电器元件控制，一改老机型气动控制元件易磨损灯弊端。利用槽轮分度机构带动装有夹具的转盘作间歇运动，完成自动灌装及内外加热、封尾、压码、切边、成品退出等一系列功能。灌装计量准确，加热时间稳定、可调、封尾外观漂亮、整齐、牢固、卫生。切边平整。该机设为8个供位，除人工上管外，其它均可自动完成。整机运行平稳可靠，无噪音和其它污染。
整机凡接触物料及某些相关部位均采用优质不锈钢制作，需要清洗部位均选用快换装置，拆洗方便。凡某些物料需要加热式保温时，其料桶外部可加装加热恒温装置。凡是使用塑料管和复合管作为包装材料的物料，都可以放心选用该机。是化妆品行业，药业、胶粘剂行业、鞋油行业等以及其它有关行业选用的上佳产品。
Ⅰ. General introduction of the machine
A. This equipment is widely used in industry of toothpaste, cosmetic, drugs and food etc., it is applicable for various plastic tube and plastic-laminated-tube. It can fill-pack all kinds of cream, latex, lotion, oil and water etc. Before you use our equipment, read this user manual carefully, so that you can make a good use of our products.
This equipment use Panasonic PLC and sensor. It can automatically fill, seal, stamp batch numbers and exit tubes(with 8 tube position) . Inner-heating and outside –heating method is adopted in the heating section, which can blow hot-wind to the tube tail-ends inner wall. The parts touched with material adopt 304 stainless steel, which can proof acid, alkali and corrosion. All the channels can be unloaded fast and agilely. The material-valve can be rotated, it can be cleanout easily, so there’s no place for the dirty. Fixing organization can fix position precisely and firmly. The position-turning part can change speed by using different-frequency. Customers can adjust the working speed themselves.
Several devices such as heatproof system( to keep steady heating temp. of the material) , mixing parts, and etc can be chosen according to the customer’s demand.
B.特点：
※ 与物料接触部分材质为304不锈钢；
※ 各部件的连接均为快装形式，便于拆卸清洗；
※ 采用高品质气动元件。
B. Characteristic:
※ The parts touched with material adopt 304 stainless steel
※ The link parts are easy to take-down and washing
※ Uses high quality pneumatic elements
II. 主要技术参数
1. 电源：~220V±10%
2．功耗：350W×2 250W×2
3. 灌装量：10~100、100~200（ml） （可根据用户需要定制）
4. 生产能力：20-40支
5. 计量精度：±1%
6. 外形尺寸：1100X800X1600（㎜）
7. 整机重量：280㎏
8．工作气压：＞0.4Mpa
II. Basic parameters of the machine
1.Power supply: ~220V±10%
2.Consume ：350W×2 250W×2
3.Air source(Mpa):air pressure ＞ 0.4Mpa
4.Filling capacity(ml): 50、100、200、250（ml） as per customer demand
5.Speed: 20-40 pcs/min
6.Measure precision: ±1%
7.Dimension（mm）: 1100*800*1600(net)
After packed: 1200*900*1800mm
8.Weight of the machine (kg)：280㎏
局部图片：
操作面板简单易操作
封尾部分：内加热+外加热（塑料管、复合管通用）
计量调节方便
封尾样管
